-
Products
-
-
Characteristics of polyurethane foam strips
Release time:
2023-08-03 15:28
Source:
Foam tape can be used for sealing electronic equipment, play adhesive, sealing, flame retardant and waterproof effect, so many rubber products custom manufacturers in the production of electrical appliances use this foam tape, and sometimes will be used for the sealing of electronic components. In theory, polyurethane foam rubber strip can play a sealing, waterproof, flame retardant effect, but in practice the effect is not satisfactory, so what is the reason for the poor waterproof effect of foam rubber strip?
In fact, polyurethane foam adhesive tape is a good waterproof, sealing effect, if the actual operation, the operator is inexperienced, or operating technology is not standardized, at this time will lead to polyurethane foam adhesive tape in the curing can not have a good waterproof effect, or the waterproof effect is relatively poor. In addition, in the actual operation, if the bonding surface is not clean, will also lead to poor curing effect, can not achieve the expected waterproof effect, but also reduce the service life.
Next Page
Related News
Problems and solutions that are prone to occur during the use of conveyor belts
The reason for belt slippage is that the friction and traction of the roller is lowered, overloaded or the tape is stuck.
Rubber industry economic operation remains stable
In 2018, the overall economic operation of China's rubber industry remained stable. Due to the decline in domestic automobile production and sales and the adjustment of logistics and transportation modes, the rubber tire products market was affected accordingly.
Production process of synthetic rubber
The production process of synthetic rubber can be broadly divided into three parts: the synthesis and refining of monomers, the polymerization process, and the post-treatment of rubber.
Inspection standards for rubber products
Appearance inspection is carried out for the first mold parts of each working shift of vulcanization process, while 100% of the parts are inspected for appearance for acceptance of finished products.
Basic characteristics of rubber products and rubber fittings
Rubber products molding, after high pressure pressing, rubber fittings because of the cohesion of the elastomer are not able to, rubber fittings, molding away from the mold, often produces unstable contraction (rubber shrinkage, depending on the type of rubber and differences)